Document
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
_______________________________________  


FORM SD
SPECIALIZED DISCLOSURE REPORT


_______________________________________  

 https://cdn.kscope.io/f6e26a714b16af7af97b51cc9100180b-learlogoa11.jpg
(Exact name of registrant as specified in its charter) 


_______________________________________  

 
Delaware
 
001-11311
 
13-3386776
(State or other jurisdiction of
incorporation or organization)
 
(Commission File Number)
 
(I.R.S. Employer
Identification No.)
 
21557 Telegraph Road, Southfield, MI
 
 
 
48033
(Address of principal executive offices)
 
 
 
(Zip code)


Terrence B. Larkin
Executive Vice President, Business Development, General Counsel
and Corporate Secretary
(248) 447-1500
(Name and telephone number, including area code, of the person to contact in connection with this report.)

_______________________________________  


Check the appropriate box to indicate the rule pursuant to which this form is being filed, and provide the period to which the information in this form applies:

x
Rule 13p-1 under the Securities Exchange Act (17 CFR 240.13p-1) for the reporting period from January 1 to December 31, 2017.
 
 

 




Company and Product Overview
Lear Corporation is a leading Tier 1 supplier to the global automotive industry. We supply seating, electrical distribution systems and electronic modules, as well as related sub-systems, components and software, to all of the world's major automotive manufacturers. As of December 31, 2017, we had 257 manufacturing, engineering and administrative locations in 39 countries and are continuing to grow our business in all automotive producing regions of the world, both organically and through complementary acquisitions.
Our business is organized under two reporting segments: Seating and E-Systems. Each of these segments has a varied product and technology range across a number of component categories:
Seating — Our Seating segment consists of the design, development, engineering, just-in-time assembly and delivery of complete seat systems, as well as the design, development, engineering and manufacture of all major seat components, including seat covers and surface materials such as leather and fabric, seat structures and mechanisms, seat foam and headrests. Further, we have capabilities in active sensing and comfort for seats, utilizing electronically controlled sensor and adjustment systems and internally developed algorithms. We also offer seat heating and cooling capabilities through technology partnerships and design-integrated supplier solutions.
E-Systems — Our E-Systems segment consists of the design, development, engineering and manufacture of complete electrical distribution systems that route electrical signals and manage electrical power within the vehicle for traditional vehicle architectures, as well as high power and hybrid electric systems. Key components in the electrical distribution system include wire harnesses, terminals and connectors and junction boxes, including components and systems for high power battery electric vehicle and hybrid electric vehicle power management and distribution systems. We also design, develop, engineer and manufacture sophisticated electronic control modules that facilitate signal, data and power management within the vehicle, as well as associated software. We have electronic hardware and software capabilities in wireless communication and cybersecurity that securely process various signals to, from and within the vehicle, as well as capabilities to provide roadside modules that communicate real-time traffic information to vehicles in the area.

Our products are more fully described in our Annual Report, which can be accessed at: https://www.lear.com/.

Lear Corporation’s policy on Conflict Minerals can be found at:
http://www.lear.com/site/suppliers/conflict-minerals.aspx?cat_id=20

Information included on the Company’s website is provided for informational purposes only and is not incorporated by reference herein.

Section 1 - Conflict Mineral Disclosure
Item 1.01 Conflict Minerals Disclosure and Report
Conflict Minerals Disclosure
In accordance with Rule 13p-1 under the Securities Exchange Act of 1934, the Company has filed this Specialized Disclosure Form (“Form SD”) and the associated Conflict Minerals Report. Both the Form SD and the Conflict Minerals Report are available on the Company’s website at: http://ir.lear.com/sec.cfm.
Information included on the Company’s website is provided for informational purposes only and is not incorporated by reference herein.
Item 1.02 Exhibit
The Company’s Conflict Minerals Report for the year ended December 31, 2017, is filed as Exhibit 1.01 to this Form SD.



Section 2 - Exhibits
Item 2.01 Exhibits
Exhibit 1.01 - Conflict Minerals Report for calendar year 2017, dated May 30, 2018.




SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this Report to be signed on its behalf by the undersigned thereunto duly authorized.    
 
 
 
Lear Corporation
 
 
 
 
 
 
Date:
May 30, 2018
 
By:
 
/s/ Jeffrey H. Vanneste
 
 
 
Name:
 
Jeffrey H. Vanneste
 
 
 
Title:
 
Senior Vice President and Chief Financial Officer


Exhibit

Exhibit 1.01

https://cdn.kscope.io/f6e26a714b16af7af97b51cc9100180b-learlogoa11.jpg

CONFLICT MINERALS REPORT
Year Ended December 31, 2017

Section 1: Introduction

This Conflict Minerals Report (the “Report”) covers the period of January 1, 2017 through December 31, 2017, in compliance with Rule 13p-1 (the “Conflict Minerals Rule”) under the Securities and Exchange Act of 1934, as amended (the “Exchange Act”). Under the Dodd-Frank Wall Street Reform Act (the “Dodd-Frank Act”), the Securities and Exchange Commission (the “SEC”) issued the Conflict Minerals Rule to require certain companies to disclose their use of conflict minerals if those minerals are “necessary to the functionality or production of a product” manufactured by those companies. Under the Dodd-Frank Act, those minerals include tin, tungsten, tantalum or gold (together, such minerals are referred to as “3TG”). Congress enacted the Conflict Minerals Rule due to concerns that the exploitation and trade of conflict minerals by armed groups is helping to finance conflict in the Democratic Republic of Congo (“DRC”) region. The Conflict Minerals Rule focuses on 3TG emanating from the DRC and nine adjoining countries (together, the “DRC Covered Countries”).

Under the Conflict Minerals Rule adopted by the SEC, companies (including Lear Corporation) are required to publicly disclose their use of conflict minerals, including through filing a “conflict minerals report” as an exhibit to Form SD, the form created for conflict minerals disclosure.


Company and Product Overview

Lear Corporation (“Lear” or the “Company”) is a leading Tier 1 supplier to the global automotive industry.  We supply seating, electrical distribution systems and electronic modules, as well as related sub-systems, components and software, to all of the world's major automotive manufacturers.  As of December 31, 2017, we had 257 manufacturing, engineering and administrative locations in 39 countries and are continuing to grow our business in all automotive producing regions of the world, both organically and through complementary acquisitions

Our business is organized under two reporting segments: Seating and E-Systems. Each of these segments has a varied product and technology range across a number of component categories:

Seating — Our Seating segment consists of the design, development, engineering, just-in-time assembly and delivery of complete seat systems, as well as the design, development, engineering and manufacture of all major seat components, including seat covers and surface materials such as leather and fabric, seat structures and mechanisms, seat foam and headrests. Further, we have capabilities in active sensing and comfort for seats, utilizing electronically controlled sensor and adjustment systems and internally


1



Exhibit 1.01

developed algorithms. We also offer seat heating and cooling capabilities through technology partnerships and design-integrated supplier solutions.

E-Systems — Our E-Systems segment consists of the design, development, engineering and manufacture of complete electrical distribution systems that route electrical signals and manage electrical power within the vehicle for traditional vehicle architectures, as well as high power and hybrid electric systems. Key components in the electrical distribution system include wire harnesses, terminals and connectors and junction boxes, including components and systems for high power battery electric vehicle and hybrid electric vehicle power management and distribution systems. We also design, develop, engineer and manufacture sophisticated electronic control modules that facilitate signal, data and power management within the vehicle, as well as associated software. We have electronic hardware and software capabilities in wireless communication and cybersecurity that securely process various signals to, from and within the vehicle, as well as capabilities to provide roadside modules that communicate real-time traffic information to vehicles in the area.

Our products are more fully described in our Annual Report, which can be accessed at: http://www.lear.com/.

Lear is a “downstream” company and is part of a global and complex supply chain, with several layers of manufacturers before reaching the smelters and refiners that may process 3TG that may ultimately be used in the products manufactured by Lear.

Lear does not have a direct business relationship with any smelters or refiners that process 3TG. As discussed later in this Report, Lear requires the suppliers in its supply chain to comply with Lear’s conflict minerals reporting requests, engage in due diligence of their respective supply chains and provide information regarding the origin of and facilities used to process the 3TG contained in the materials supplied to Lear.

 
Section 2: Due Diligence Framework

The final Conflict Minerals Rule adopted by the SEC requires that an issuer of the report undertake a due diligence process and that such due diligence follow a nationally or internationally recognized due diligence framework. Lear designed its due diligence measures to be in conformity, in all material respects, with the internationally recognized five-step due diligence framework established by the Organisation for Economic Co-operation and Development (“OECD”), the Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas (the “OECD Guidance”), which satisfies the Conflict Minerals Rule requirements regarding due diligence. Because Lear’s products, like those of many of its peers in the automotive industry, contain 3TG minerals, Lear also conducted a “Reasonable Country of Origin Inquiry” (“RCOI”) regarding the origin of the 3TG minerals used in its products.


2



Exhibit 1.01

The following provides a description of Lear’s due diligence process:

2.1 OECD Step 1: Strong Management System

A.
Conflict Minerals Sourcing Policy

Lear developed and adopted a “Conflict Minerals Sourcing Policy” that is published on Lear’s public website at: http://www.lear.com/ and is contained in Attachment A to this report.

The policy states that Lear will comply with the disclosure and reporting requirements of the Conflict Minerals Rule of the Dodd-Frank Act, as well as the rules of the SEC promulgated thereunder.

The policy also states that Lear requires legal and ethical sourcing of materials in its supply chain and, as part of its Conflict Minerals Sourcing Policy, imposes an obligation on Lear’s suppliers to engage in due diligence of their respective supply chains to understand and report the content of the parts such suppliers provide to Lear.

The policy is also cited in the latest comprehensive “Lear Supplier Sustainability Policy” describing Lear’s pursuit to prevent the flow of funds to armed groups and conflicts as part of its broader sustainability objectives. The “Lear Supplier Sustainability Policy” is published on Lear’s public website at http://www.lear.com/ and is contained in Attachment B to this report.


B.
Internal Management Structure

Cross Functional Team

A “Cross Functional Team” was appointed by Lear leadership to support the supply chain due diligence undertaken by Lear. Representatives from Lear’s Purchasing, Engineering, Finance, Corporate Compliance, Information Technology, Environmental, Health and Safety, Philippine Engineering and Technology Center and Legal departments serve on the team.

The purpose of the Cross Functional Team is to ensure availability of resources necessary to support Lear’s supply chain due diligence process. The team monitors the execution and effectiveness of Lear’s due diligence process and collaborates to develop improvements to such process.
 
Report Findings to Designated Senior Management and Board of Directors - Lear’s designated members of the Company’s Senior Management and the Company’s Board of Directors are provided an update relating to conflict minerals activities by the Environmental Health and Safety Department, upon request.


3



Exhibit 1.01


C.
Controls and Transparency Over the Mineral Supply Chain

Industry Driven Programs

The OECD Guidance encourages participation in industry-driven programs to establish an industry-wide system of controls and transparency over the mineral supply chain including either a chain of custody or a traceability system. As outlined in the OECD Guidance. Lear supports an industry initiative that validates smelters’ or refiners’ (“SORs”) due diligence activities. The industry initiative is the Responsible Minerals Initiative® (“RMI”®) of the Responsible Business Alliance (RBA®), formerly the Conflict-Free Sourcing Initiative® (CFSI®) of Electronic Industry Citizenship Coalition (EICC®) and the Global e-Sustainability Initiative (GeSi®). Lear is recognized in RMI under company member code “LEAR.”

RMI validates SORs due diligence activities through its Responsible Minerals Assurance Process (“RMAP”), formerly the Conflict-Free Smelter Program (“CFSP”). The RMAP uses an independent third-party audit to identify smelters and refiners that have systems in place to assure sourcing of conflict-free materials. Companies can then use this information to assess and make informed choices concerning their supply chains. The audit standards were developed according to global frameworks including the OECD Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas and the Dodd-Frank Act.

Lear participates in the Automotive Industry Action Group (“AIAG”), an automotive industry group whose members include original equipment manufacturers (“OEM”) and “Tier” suppliers. Lear collaborates with AIAG through the Conflict Minerals Work Group (“CMWG”), which was established to prepare suppliers for reporting that will enable compliance with provisions of the Conflict Minerals Rule. The CMWG created different sub groups to support specific initiatives to develop tools and resources to assist companies and their supply chain in the reporting processes. Lear joined the Smelter Engagement Team (“SET”), Training and Education, Due Diligence and Communications sub groups of the CMWG. Lear also participates in the RMI’s SET. The SETs conduct research and outreach encouraging SORs to participate in the RMI which supports the validation of SORs as conflict free. Validation through the RMI evaluates chain of custody and/or traceability of the minerals from the mine to the SORs. This is the primary methodology for downstream suppliers (such as Lear) to have influence on the upstream supply base (such as the smelters and refiners).

D.
Company Engagement with Suppliers

Lear has established an online supplier portal to strengthen Lear’s engagement with its suppliers.


4



Exhibit 1.01


The supplier portal is available at Lear’s website at: http://www.lear.com/site/suppliers/.

The “Suppliers” tab serves as a supplier information portal that provides the supply chain a unique opportunity to view and access important Lear information and updated web guides for suppliers. Web guides are referred to in the “Terms and Conditions” used by Lear when contracting with suppliers, and such web guides contain requirements not specifically identified in the Terms and Conditions. Web guides include a Global Requirements Manual for Suppliers and contain information for suppliers regarding the Conflict Minerals Rule. Also, under the “Suppliers” tab, additional conflict minerals related documents are provided (e.g., Lear’s Conflict Minerals Sourcing Policy, supplier expectations and communication requests to the supplier).

Suppliers are able to contact a Lear conflict minerals representative anytime via e-mail at: conflictminerals@lear.com.

E.
Grievance Mechanism

The conflictminerals@lear.com mailbox is a mechanism available for any interested party to communicate their concerns/grievances regarding Lear’s conflict minerals process.

This mailbox is checked daily for communications from interested parties.

In the event that a grievance is submitted, the established process is to review the contents of the grievance, discuss with appropriate Lear individuals to seek resolution and communicate back to the person submitting the grievance.


2.2 OECD Step 2: Identify and Assess Risk in Our Supply Chain

Lear engaged in a number of steps to identify which of its suppliers are known to have 3TG in their products and request that such suppliers complete a template to assist Lear in identifying and assessing risks in its supply chain.

A.
Identification of Suppliers and Point of Contact

Suppliers are requested to identify the individual(s) responsible for providing conflict mineral information for their company.

RCOI is made using the RMI’s Conflict Minerals Reporting Template (the “CMRT”), which is described in further detail below.



5



Exhibit 1.01

RCOI is an inquiry regarding the origin of 3TG that is designed to determine where the minerals used by Lear’s suppliers originated or if they are from recycled or scrap sources.

The CMRT was developed by the RMI as a standard reporting template for companies to use to facilitate disclosure and communication of information regarding SORs that provide material to a company’s supply chain. It includes questions regarding a company’s conflict mineral free policy, engagement with its direct suppliers and a listing of the SORs the company and its suppliers use. In addition, the CMRT contains questions about the origin of conflict minerals included in suppliers’ products, as well as about the due diligence conducted by suppliers.

B.    Assessment of Risk

Lear utilizes the International Material Data System (“IMDS”) to identify and assess risk of relevant suppliers that provide components to Lear, as an initial step. Lear communicates the conflict minerals reporting request by e-mail with its suppliers identified in the IMDS list known to have 3TG in their products.

The IMDS is a collective, computer-based material data system for the automotive industry to manage environmental relevant aspects of the different parts in vehicles.

Lear considers the following risk elements in its due diligence process:

Completeness of the submission of information by Lear’s suppliers, especially for those suppliers known to have 3TG in their components. The AIAG’s CM-3 Guide for Conflict Minerals Reporting to the Automotive Industry (“CM-3 Guide”) and other available guidance across the industry are used to determine completeness of submission by analyzing the supplier’s answers to each question contained in the CMRT.

Submission of SORs data and determination if SORs had been validated to be compliant with the RMI.

Consistency and substantiation of information by cross-checking submissions with the IMDS data.

As questions arise regarding supplier submissions, Lear communicates by e-mail with the supplier for clarification and understanding.


2.3 OECD Step 3: Design and Implement a Strategy to Respond to Identified Risks

Lear’s conflict minerals due diligence is an on-going and proactive process.


6



Exhibit 1.01

Lear’s strategy for identifying risks focused on the following:

An assessment of all responses received from suppliers using the CM-3 Guide, the IMDS data information and the RMI’s smelter database information. Supplier responses are categorized as follows: (i) accepted (meaning the response satisfied the requirements and expectations set forth in the CMRT); (ii) inconsistent or incomplete (meaning the response contained inconsistent information when compared against known or existing IMDS data and clarification is required, or expected inputs are missing); and (iii) rejected (meaning the CMRT data is invalid or not presented in the required format). Categorizing a response is prompted by the completeness or quality of the answer and cross-checks undertaken by Lear. Suppliers are notified by e-mail of the status of their CMRT responses and if rejected, or if incomplete or inconsistent submissions, suppliers are asked to correct and resubmit.

A listing of SORs information provided to Lear by its supply chain is compiled. The listing contains conflict free smelters and refiners as well as facilities that are not yet validated to be compliant with RMAP. As noted, Lear supports the RMI and their independently verified list of conflict-free SORs through their RMAP. 


2.4 OECD Step 4: Independent Third Party Audit of Supply Chain Due Diligence

As a downstream supplier, Lear does not have a direct relationship with 3TG smelters and refiners and does not perform or direct audits of these entities within its supply chain.


2.5 OECD Step 5: Report on Supply Chain Due Diligence
 
Lear prepares this Report and the associated Form SD and makes such documents available online at: http://ir.lear.com/sec.cfm.


Section 3: Due Diligence Measures Undertaken

In accordance with the OECD Framework, Lear took the following measures for this reporting year to exercise due diligence on the source and chain of custody of conflict minerals as defined by Section 1502 of the Dodd-Frank Act.

Utilized the IMDS to identify and assess risk of relevant suppliers that provide components to Lear.
Communicated the conflict minerals reporting request by e-mail to suppliers that are both identified in the IMDS list known to have 3TG in their products and one of Lear’s top suppliers in terms of the spend amount of the Seating and E-Systems business segments.
Continued to employ the AIAG CM-3 Guide and included the RMI CMRT Completion Guide to validate and assess potential risk on the CMRT declaration from suppliers
Determined completeness of the CMRT declaration from suppliers by analyzing the answers to each question contained in the CMRT, and considered the following risk elements:


7



Exhibit 1.01

Accuracy of SORs data and determination if SORs had been validated to be compliant with the RMAP of RMI.
Consistency and substantiation of information by cross-checking submissions with the IMDS data.
Utilized smelter database tools and resources to compare the SORs identified in Lear’s supply chain in order to determine the status of such SORs.
Categorized supplier responses as follows: (i) accepted (meaning the response satisfied the requirements and expectations set forth in the CMRT); (ii) inconsistent or incomplete (meaning the response contained inconsistent information when compared against known or existing IMDS data and clarification is required, or expected inputs are missing); and (iii) rejected (meaning the CMRT data is invalid or not presented in the required format). Categorizing a response is prompted by the completeness or quality of the answer and cross-checks undertaken by Lear.
Suppliers were notified by e-mail of the status of their CMRT responses and if their response is rejected, or if incomplete or inconsistent, suppliers were asked to correct and resubmit.
As questions arose regarding supplier CMRT declaration, Lear communicated by e-mail and telephone with the supplier for clarification and understanding.
Lear participated on the AIAG CMWG and RMI by attending periodic meetings or conference calls.
Financially supported the RMAP by continued membership with RMI.
Participated in the 2017 Conflict Minerals Automotive Industry Briefing together with customers, industry peers and supply base.
Volunteered for AIAG SET-Coordinated Smelter Pre-Audit Visit participation.


Section 4: Continuous Improvement Efforts to Mitigate Risk

As a result of its 2016 due diligence, Lear identified two continuous improvement efforts to improve the due diligence process and further mitigate risk for 2017 conflict mineral reporting:

Incorporating the conflict minerals compliance requirements and data integrity validation points into business processes for incoming products, procurement and change management.

Results: Lear has started creating a comprehensive sustainability strategy including integration of environment, social and economic aspects into business decisions, operations and governance. The conflict minerals compliance process is captured under this strategy. Specific integration to relevant business unit such as procurement group and supply chain management will be categorized and developed further.

Continued collaboration with AIAG, RMI, and participation in cross-industry forums to ensure access to up-to-date smelter status information, current events and legislation related to conflict minerals (as discussed in item C on page 3 of this report).

Results: Lear continued collaboration with AIAG CMWG and RMI by participating in meetings and providing inputs on the various topics and projects such as providing training and education in the interest of supply base.



8



Exhibit 1.01

Participation in both AIAG SET and RMI SET to support research and outreach projects which encourage smelters and refiners to participate in the RMI. Lear will also continue to provide input to the Supplier Survey of RMI. RMI solicits supplier surveys to refresh the aggregated list of potential and actual SORs in CFSI member company supply chains. This information will be used to help identify SORs and aliases, cover as many smelters and refiners as possible and prioritize research and outreach throughout the reporting year.
Results: Lear volunteered to participate in AIAG SET-coordinated smelter pre-audit visits to support the automotive industry objective in expanding smelter outreach efforts with RMI.
During 2018, Lear’s continuous improvement efforts to mitigate risk will focus on:

Further integration of the conflict minerals compliance requirements and process between cross-functional teams within Lear’s organization globally.
Enhancement of the record keeping tools and supply base declaration tracking system for further efficiency.
Continued collaboration with AIAG, RMI, and other relevant cross-industry groups to ensure alignment with current industry outreach and efforts with respect to conflict minerals.
Lear will continue to provide input to the Supplier Survey of RMI. RMI continually solicits supplier surveys to refresh the aggregated list of potential and actual SORs in RMI member company supply chains. This information will be used to help identify SORs and aliases, cover as many smelters and refiners as possible and prioritize research and outreach throughout the reporting year.

Section 5: Due Diligence Results

As a result of the latest RCOI and continuous due diligence efforts, Lear has identified a large number of SORs; however, Lear cannot state with certainty yet that all SORs within its supply base have been identified. Based on the declaration gathered from its supply base to date, Lear is also unable to determine with certainty the conflict-free status of each specific product. Nevertheless, Lear continues to evaluate potential areas within the business to improve its process to mitigate risks associated with conflict minerals.

Smelter Information
2017 RCOI
Metal
Number of Reported SORs
Conflict-Free /
CFSP Compliant
Active Research
and Outreach
Not Eligible /
Confirmed Non-SORs
Gold
101

91

0
Tantalum
41

5

5

Tin
70

68

5

Tungsten
41

14

1





9



Exhibit 1.01

Section 6: Forward-Looking Statements

This Report contains “forward-looking statements” about activities, events or developments that Lear intends, expects, projects, believes or anticipates will occur in the future. Forward-looking statements include all statements that do not relate solely to historical or current facts and can generally be identified by the use of future dates or words such as "may," "should," "could," “will,” "expects," "seeks to," "anticipates," "plans," "believes," "estimates," "intends," "predicts," "projects," "potential" or "continue" or the negative of such terms and other comparable terminology. Such statements are only our expectation of the outcome of future events. The outcome of the events described in these forward-looking statements is subject to substantial known and unknown risks, uncertainties and other factors that may cause results and developments to differ materially from those anticipated in our forward-looking statements. Lear’s Form 10-K for the year ended December 31, 2017 and subsequent filings with the SEC discuss some of the factors that could contribute to these differences. You are cautioned not to unduly rely on such forward-looking statements, which speak only as of the date made, when evaluating the information presented in this Report. Lear expressly disclaims any obligation or undertaking to disseminate any updates or revisions to any forward-looking statement contained herein, to reflect any change in its expectations with regard thereto, or any other change in events, conditions or circumstances on which any statement is based.


10



Exhibit 1.01


Attachment A

https://cdn.kscope.io/f6e26a714b16af7af97b51cc9100180b-learlogoa11.jpg
CONFLICT MINERALS SOURCING POLICY

On August 22, 2012, under the Dodd-Frank Wall Street Reform and Consumer Protection Act, the U. S. Securities and Exchange Commission (SEC) approved the final rule to impose disclosure and reporting requirements related to conflict minerals (tin, tungsten, tantalum, and gold). The rule requires U. S. publicly traded companies to disclose the presence of conflict minerals originating in the Democratic Republic of the Congo (DRC) or adjoining countries in the products they manufacture, if the conflict minerals are necessary to the functionality or production of such products.

As a supplier in the automotive and non-automotive industries, Lear uses a variety of materials in the products it manufactures. The supply chain for these materials is complex.

It is Lear’s policy to comply with the disclosure and reporting requirements of Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act, as well as all rules of the SEC promulgated under such Act. Lear requires legal and ethical sourcing of materials in our supply chain and, as part of our Conflict Minerals Sourcing Policy, Lear requires its suppliers to engage in due diligence of their supply chain to understand and report the content of their parts supplied to Lear.

 
 
 
 
 
 
 
 
 
 
 
 
By:
 
/s/ Raymond E. Scott
 
 
 
 
 
 
 
Title:
 
President and Chief Executive Officer



11



Exhibit 1.01

Attachment B

https://cdn.kscope.io/f6e26a714b16af7af97b51cc9100180b-learlogoa11.jpg
SUPPLIER SUSTAINABILITY POLICY

It is Lear’s belief that how we operate as a Company, and as individuals, is based on the principle of doing the right thing. This leads our customers and business partners to do business with us, our shareholders to invest in us, our external stakeholders to respect us, and the best talent to join us in working for Lear.
This Supplier Sustainability Policy identifies the global standards to be followed in your business activities on behalf of Lear. Suppliers are expected to share Lear’s commitment to these standards.
Code of Business Conduct and Ethics
Lear conducts business with integrity and in compliance with all applicable laws and regulations. A commitment to integrity is critical to how we conduct business and maintain our outstanding reputation in the communities in which we do business. Suppliers are expected to understand and comply with Lear’s Code of Business Conduct and Ethics (http://files.shareholder.com/downloads/LEA/4040709065x0x280321/DE9BDF69-1C46-4747-9762-4E06193ECA37/ir_cg_conduct.pdf), and demonstrate the highest standard of integrity and ethical conduct in all business activities.
Legal Compliance
Lear is committed to complying with all applicable legal requirements. Suppliers are expected to comply with all applicable legal requirements and prevent incidents or conditions that might result in a violation of law. All purchased materials used in manufacture of goods shall satisfy current governmental and safety constraints on restricted, toxic and hazardous materials as well as environmental, electrical and electromagnetic considerations applicable to the country of manufacture and sale. All suppliers must be in compliance with ISO14001, TS16949 and ELV (End-of-Life) Directive, or their successors, as amended from time to time.
Human Rights
Lear is committed to recognizing human rights and labor principles throughout its global organization and supply chain. Lear considers employees to be one of the most important resources and is committed to the treatment of all employees with dignity and respect. All suppliers are required to comply with local laws governing the employment relationship.
Child Labor
Lear’s suppliers will not use child labor. The term child refers to children under the legal age for employment in any location.
Forced Labor, Human Trafficking
Lear believes that all employees should have the right to voluntarily elect whether to be employed by the supplier. The supplier will not use forced or involuntary labor of any kind or tolerate physically abusive disciplinary practices.


12



Exhibit 1.01

Wages and Hours, Working Conditions
Suppliers must comply with all applicable wage and hour laws, including minimum wage, overtime, maximum hour rules, meal and rest periods, and to provide legally mandated benefits. Where local industry standards exceed applicable legal requirements, suppliers are encouraged to provide wages and ensure working conditions that meet the higher local industry standards.
Coercion, Harassment and Discipline
Lear expects its suppliers to treat their employees with dignity and respect. Suppliers are expected to have systems in place to prevent, detect, and resolve unacceptable worker treatment such as harassment, inappropriate use of discipline, discrimination, physical or mental punishment, or other forms of intimidation or abuse (e.g., physical abuse, threat of abuse, sexual or other harassment, verbal abuse, any type of corporal punishment, or other forms of mental and/or physical coercion as a form of discipline).
Discrimination
Lear is committed to providing all employees with a professional working environment which is free from unlawful forms of discrimination and harassment. Suppliers must make all employment decisions based on the facts and individual merit. Suppliers shall not discriminate in their hiring and employment practices (e.g., pay/promotion) and must follow all employment laws.
Freedom of Association and Collective Bargaining
Suppliers must respect their employees’ right to choose to join or not to join a trade union, or to have recognized employee representation in accordance with local law. Suppliers are expected to maintain constructive dialogue and negotiate in good faith with such representatives. Suppliers shall not harass, discriminate against, or otherwise penalize workers, worker representatives, or trade union members because of their interest and/or membership in, or affiliation with, a trade union, or their legitimate trade union activity, in accordance with international labor standards.
Preventing Bribery and Corruption
Lear is committed to conducting business ethically throughout the world. Lear prohibits suppliers from giving or promising to give anything of value to employees or representatives of foreign governments, governmental agencies, political parties, or to political candidates, for the purpose of obtaining or retaining business. Suppliers must conduct business with integrity and in full compliance with all applicable laws.
Environmental, Health & Safety
Lear is committed to complying with all applicable environmental, health and safety legal requirements and protecting the environment. Suppliers are expected to comply with all applicable environmental, health and safety legal requirements and prevent incidents or conditions that might result in a violation of law or otherwise endanger the environment.
Suppliers must provide each employee with a safe and healthful work environment. Each supplier has responsibility for maintaining a safe and healthy workplace for all employees by following health and safety rules and practices and reporting accidents, injuries and unsafe equipment, practices or conditions as stated in the Environmental, Health and Safety Policy (http://www.lear.com/user_area/content_media/raw/EnvironmentalHealthSafetyPolicy.pdf).


13



Exhibit 1.01

Environmental Sustainability
Lear adopts the definition for Sustainability as "meeting the needs of the present without compromising the ability of future generations to meet their own needs." For Lear, this means being aware of our impacts and understanding how these affect the world around us. Our mission is to reduce these impacts while increasing the profitability and longevity of our company.
Lear expects its suppliers to support Lear’s sustainability mission by complying with all applicable environmental laws, rules and regulations while using resources wisely. Suppliers are expected to share Lear’s commitments by developing and implementing a sustainability program focused on using natural resources responsibly, reducing water usage, reducing waste generation, improving energy efficiency and reducing the carbon footprint of their operations. 
Preventing the Flow of Funds to Armed Groups and Conflicts
Lear strives to use only components with raw materials where extraction, transport, trade, processing and export are obtained from validated sources as a matter of principle, wherever practicable. We ask our suppliers to source responsibly and endeavor to understand that sourcing of their materials neither directly nor indirectly provides funding to conflicts and human rights abuses. Further, compliance with conflict minerals requirements is outlined in the Lear Conflict Minerals Sourcing Policy (http://www.lear.com/user_area/content_media/raw/Conflict_Minerals_Sourcing_Policy.pdf).
Animal Welfare
Lear upholds the highest standards for ethical behavior. With respect to animal welfare, we require compliance with all legal requirements and, as applicable, we expect our suppliers to implement industry-best policies and practices related to the ethical treatment of animals. Lear commits to a belief in the humane treatment of animals, including freedom from thirst and hunger, freedom from discomfort, pain, injury and disease, freedom to express normal behavior, and freedom from fear and distress.
Implementation of Sustainability Standards in the Supply Chain
Lear expects its suppliers and all subcontractors to abide by the requirements of this Supplier Sustainability Policy, including identifying risks within their supply chains and taking appropriate measures to address them.
Right to Audit and Ensure Compliance
Lear reserves the right to conduct audits to ensure compliance with these requirements and also reserves the right to take appropriate measures, including discontinuing any relationship with a supplier should the supplier violate, fail to correct, or have a pattern of violating this Policy.






14